Direct answer: A buyer who capped the search at $350,000 on the morning of November 20, 2026 had verified two-unit choices in all three communities, but the size of the active sample differed. The screened MLS results contained five exact two-unit listings in South Shore, 14 non-auction exact two-unit listings in South Chicago, and 12 exact two-unit listings in Austin. The median asking prices were $284,900 in South Shore, $252,450 in South Chicago, and $256,220 in Austin. Those figures describe current asking prices, not closed prices, appraised values, or expected contract prices.

Paul Luxury Homes

What was available in the verified search?

The strongest first distinction is inventory depth. South Shore had the smallest sample, so one listing can move its average or median substantially. South Chicago and Austin offered more choices at the same price ceiling. That does not make one neighborhood automatically better. It means a buyer may have more room to compare layouts, condition, financing requirements, occupancy, and repair risk before deciding which properties deserve a tour.

The figures below came from a live Chicago MLS search run through Paul Luxury Homes. The search required the property type to be multifamily, the MLS total-number-of-units field to equal exactly two, the asking price to be no more than $350,000, and the listing to fall within the named Chicago community area. We did not classify a building as a two-flat merely because it had two bathrooms, two kitchens in remarks, or a familiar-looking exterior.

CommunityScreened exact two-unit listingsAsking-price rangeMedian asking priceAverage asking price
South Shore5$150,000 to $350,000$284,900$260,960
South Chicago14 non-auction listings$45,000 to $350,000$252,450$241,536
Austin12$189,000 to $350,000$256,220$262,178

South Chicago's screened range begins at $45,000, an unusually low asking price that should trigger extra investigation rather than an assumption that the property is a bargain. The original result set also contained a separate $1 auction record. We removed that auction record from the comparison because a nominal auction starting figure is not comparable to a conventional asking price. A low list price can reflect condition, access limitations, financing restrictions, title issues, occupancy, or a seller's marketing strategy. None of those possibilities should be treated as fact until the listing documents, disclosures, and property inspection support them.

Linked examples at the low, middle, and upper portions of each sample

These examples are checkpoints, not recommendations to buy. They help show how widely asking prices can vary even after the search is limited to exact two-unit properties. All prices and statuses can change after publication.

CommunityProperty exampleAsking price on Nov. 20, 2026MLS-reported total beds/baths
South Shore7420 S Kenwood Avenue$150,0004 beds / 2 baths
South Shore7514 S Dante Avenue$284,9008 beds / 3 baths
South Shore7806 S Cregier Avenue$350,0005 beds / 3 baths
South Chicago8638 S Muskegon Avenue$45,0004 beds / 2 baths
South Chicago8325 S Saginaw Avenue$254,9006 beds / 3 baths
South Chicago7955 S Coles Avenue$350,0006 beds / 2 baths
Austin809 N Waller Avenue$189,0005 beds / 2 baths
Austin414 N Lawler Avenue$250,0005 beds / 2 baths
Austin1517 N Laramie Avenue$350,0004 beds / 2 baths

The bedroom and bathroom figures in the table are totals reported for the building. They do not establish the bedroom mix inside each individual unit. For example, five total bedrooms could be divided three-and-two, but a buyer should never assume that split without checking the unit-level fields, floor plan, listing documents, and the property itself. The same caution applies to garden spaces, attic rooms, and finished lower levels. A room used as a bedroom is not automatically a legal above-grade bedroom.

How should a buyer compare the three areas?

Start with the intended use. An owner-occupant may care most about which unit will be delivered vacant, whether that unit is suitable for the household, and whether the projected payment works without depending on optimistic rent. An investor may focus more heavily on verified leases, security deposits, tenant payment history, utility responsibility, deferred maintenance, and realistic operating expenses. Both buyers need to know whether the building is legally configured and whether the current use matches city records.

Next, compare each building as a small operating property rather than as a large single-family home. Ask for the rent roll, leases, utility bills when available, insurance quote, current tax bill, and a list of recent repairs. Determine who pays heat, water, gas, and electricity. Separate meters can matter, but their presence alone does not prove that every system or unit is legal. Confirm service capacity and condition with the appropriate licensed professionals.

Condition deserves a line-by-line budget. Roof age, masonry, porches, windows, plumbing supply and drain lines, electrical service, heating systems, and basement moisture can create very different ownership costs. A lower asking price may leave room for repairs, or it may indicate a project that exceeds the buyer's cash, financing, or experience. A higher asking price does not guarantee that major components have been replaced correctly or with permits.

Financing should be reviewed before touring a long list. Two-unit owner-occupied financing may be available under several loan programs, but down payment, reserves, rental-income treatment, appraisal requirements, and property condition rules vary by lender and borrower. A preapproval amount is not the same as a safe operating budget. Buyers should ask a lender to estimate the payment using the actual price, taxes, insurance, mortgage insurance when applicable, and only the rent that the program permits the lender to count.

A practical tour-selection method

  1. Verify the legal and MLS unit count. Keep the exact-two-unit filter, then compare it with city and assessor records. Resolve any mismatch before relying on rental income.
  2. Confirm occupancy and access. Ask which units are occupied, which can be shown, whether a unit will be vacant at closing, and whether written leases exist.
  3. Confirm the unit mix. Record bedrooms, bathrooms, kitchen condition, heating arrangement, and approximate size for each unit separately. Do not use the building-wide bed count as the unit plan.
  4. Build a conservative monthly estimate. Include principal and interest, property taxes, insurance, water, owner-paid utilities, maintenance, vacancy, and a reserve for larger repairs.
  5. Screen the physical risk. Review disclosed defects, permits when relevant, exterior condition, basement, roof, porches, masonry, and mechanical systems before ranking the property.
  6. Compare at least three candidates. A low, middle, and upper-price option can reveal whether a higher asking price actually buys better condition, a stronger unit mix, parking, or lower near-term repair exposure.

This method helps prevent a common mistake: choosing a building based on total bedrooms and list price while overlooking whether the owner unit works, the second unit is rentable, or the repairs fit the available cash. A two-flat purchase has both housing and operating decisions, so the tour shortlist should reflect both.

What the current numbers do and do not tell us

The median is useful because it is less distorted by one very low or very high asking price than an average. In this sample, the median asking prices in South Chicago and Austin were close, while South Shore's median was higher and based on only five listings. That is a useful snapshot, but it is not evidence that one area's buildings are worth more. The properties may differ in condition, exact location, unit mix, parking, occupancy, lot, financing eligibility, or seller motivation.

Asking prices are not closed prices. The article does not claim that any example will sell at its current price or qualify for a particular loan. It also does not estimate rent, cash flow, after-repair value, or market value. Those conclusions require property-specific records and, for valuation, appropriate comparable closed sales. Listings may be changed, canceled, placed under contract, or sold after this article is published.

The MLS sample was dated November 20, 2026. We required an exact reported total of two units. The search initially returned five South Shore records, 15 South Chicago records, and 12 Austin records. We excluded the $1 South Chicago auction record from the summary statistics and conventional-listing count. We did not copy listing remarks or photos, and we did not infer condition, occupancy, legal status, parking, or unit bedroom distribution where those items were not verified in the retrieved fields.

Related Paul Luxury Homes guides

Buyers who want broader neighborhood context can review the South Shore buyer guide, the South Chicago buyer guide, and the Austin buyer guide. Those pages cover a wider range of property types. This comparison intentionally stays narrow: active multifamily listings at or below $350,000 with exactly two units reported in the MLS.

Next step for a two-flat buyer

Before booking tours, choose a preferred owner unit, a comfortable total monthly budget, a repair reserve, and a maximum purchase price. Then ask Paul Luxury Homes to refresh the exact-two-unit search, verify current status, and obtain the documents available for the strongest candidates. Contact Paul Luxury Homes for a current shortlist in South Shore, South Chicago, Austin, or a different Chicago neighborhood.

Property and market sources